Battery Maintenance; Fuse Replacement - Bennche Bighorn 400 Owner's Manual

Battery Maintenance

1. When the vehicle is not used for a month
or longer, remove the battery and store it
in a cool, dark place. Completely
recharge the battery before reinstallation.
2. Always make sure the connections are
correct when putting the battery back in
the vehicle.
1. Positive battery lead 2. Negative battery lead
Periodic Maintenance and Adjustment
CAUTION:
A special battery charger (constant
voltage/ampere or constant voltage) is
required for recharging a sealed-type battery.
Using a conventional battery charger may
shorten the battery life.

Fuse Replacement

The main fuse and the fuse box are located
under the seat. (See pages 4-18 for remove
seat.)
If a fuse is blown, turn off the ignition switch
and install a new fuse of the specified
amperage.
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off the
electrical circuit in question.
2. Remove the seat, then unplug the relay
assembly and open the relay cover.
8-42