Changing The Coolant - Bennche Bighorn 400 Owner's Manual

8-21 Periodic Maintenance and Adjustment
temperature.
NOTE:
The coolant should be between the minimum
and maximum level marks.
1. Coolant reservoir cap
2. Maximum level mark
4. If the coolant is at or below the minimum
3. Minimum level mark
level mark, remove the reservoir cap,
add coolant to the maximum level mark,
install the reservoir cap, and then close
the hood.
Coolant reservoir capacity
(up to the maximum level mark):
0.663 qt (0.627L)
CAUTION:
Mix anti freeze with distilled water only.
However, if distilled water is not available,
soft water can be used for refilling.

Changing the Coolant

The coolant must be changed by a service
center at the intervals specified in the
periodic maintenance and lubrication chart.