Seats - Bennche Bighorn 400 Owner's Manual

Seats

To remove the seat bench, pull front of seat
upward, then slide seat forward.
1. Driver / Passenger seat
To install seat bench, insert tabs on rear of
seat into the seat holders located on the UTV
frame. Push down the front of the seat until it
snaps in place.
Control Functions
WARNING
POTENTIAL HAZARD
A loose seat.
WHAT CAN HAPPEN
The operator could lose control or the
operator and/or passenger could fall if
the seat is loose during operation.
HOW TO AVOID THE HAZARD
Make sure the seat is securely latched.
4-18