Warming Up; Drive Select Lever Operation And Reverse - Bennche Bighorn 400 Owner's Manual

6-4 Operation
the vehicle and charged battery, and
then disconnect the positive lead of the
jumper cable from the charged battery
and the battery in the vehicle.
7. Install the battery compartment cover.
8. Install the seat.

Warming up

To get maximum engine life, always warm up
the engine before starting off. Never
accelerate hard with a cold engine! To see
whether or not the engine is warm, check if it
responds to the throttle normally with the
choke turned off.

Drive select lever operation and reverse

driving
CAUTION:
Before shifting, you must stop the vehicle
and take your foot off the accelerator pedal.
Otherwise, the transmission may be
damaged.
Shifting: Neutral to Forward
1. Stop the vehicle. Keep your foot off the
accelerator pedal.
2. Apply the brakes, and then shift by
moving the drive select lever along the
shift guide.
NOTE:
Make sure that the drive select lever is
completely shifted into position.