Seat Belts - Bennche Bighorn 400 Owner's Manual

4-19 Control Functions

Seat belts

This vehicle is equipped with three-point seat
belts for both the operator and passenger.
Always wear seat belts while riding in the
vehicle.
1. Seat belt (×2)
3. Buckle (×2)
2. Latch plate (×2)
Proper use of the seat belts involves the
following steps:
1. Hold the latch plate as you pull the belt
across your lap and chest. Make sure the
belt is not twisted and is not caught on
any portion of the vehicle, your clothing,
or any equipment you are carrying.
2. Push the latch plate into the buckle until it
clicks. Pull up on the latch plate to make
sure it is secure.
3. Place the lap portion of the belt low on
your hips. Push down on the buckle end
of the belt as you pull up on the shoulder
part so the belt is snug across your hips.