Page 3
ENGLISH operation. DO NOT cover the mist outlet or place anything over it while the unit is operating. PLEASE READ AND SAVE THESE • Use the appliance only for its intended household IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety use as described in this manual.
PARTS (see FIG. 1) 3. Fill the tank with clean water to the MAX mark Mist outlet then screw the filter/water tank cap back tightly onto the tank. C Water tank 4. Put the water tank back into the base. D Mist chamber 5.
3. Remove any packaging from the new filter and AUTO MODE The Auto mode sets your humidifier to operate at screw it into the tank cap (F). a preset level of 55%. Press the Auto button (Q) to 4. Fill the water tank with clean water. Refit the select the auto mode.
5. If moisture forms on walls or windows in your The rights and benefits under this guarantee are home, turn your humidifier OFF. additional to your statutory rights, which are not affected by this guarantee. Only Jarden Consumer STORAGE Solutions (Europe) Ltd. (“JCS (Europe)”) has the right If you do not plan to use your humidifier for an to change these terms.
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Control panel screen is dark, no mist Unit not turned on Turn on unit and no airflow from the unit Not connected to the mains supply Connect to the mains supply The unit is beeping, the Water tank No water in the water tank Refill the water tank empty icon (K) is on and there is no...