Conversion From Wall Mounting Installation To Floor Mounting - A.O. Smith HSE-HAS User Manual

Conversion from Wall Mounting Installation to Floor Mounting

Step 1: Factory default installation (wall hung).
Step 3: Turn 90 degrees and remove four oor
mounting caps.
Floor
mounting
cap
Step 5: Assembly nished depiction.
Note: The Water Heater comes with default wall hung installation. The same should not be used for
oor mounting. Separate oor mounting accessories have been provided for oor mounting option.
Step 2: Remove the cap and unscrew the Tank
bolt with the socket wrench. Unscrew the screw
and remove the Wall mount bracket and
Bracket support as shown in the below gure.
Step 2.1: Step 2.2: Step 2.3:
Remove Loosen Bolt Remove
cap using Socket Tank bolt
wrench
Cap Socket wrench Wall mount
Step 4: Use four screws (accessories) to x the
two Wall mount brackets in place.
Step 6: Floor installation.
9
Step 2.4:
Remove
Screws using
Screw driver
Tank bolt
Screw
Bracket support
bracket