Function Tab - Panasonic KV-S1028Y Additional Information

Function tab

Set the basic functions and maintenance functions of the unit.
User Settings
Item
USB ID
Language
Sleep
Power Off
LCD Contrast
Roller Cleaning Notification
Roller Replacement Notification
Glass Cleaning Notification
Select Counter
Date Format
Counter
Item
Scan
System
After clean Roller Counter
After Replace Roller Counter
Clean Roller Timing
Replace Roller Timing
Date and Time
Item
Use the PC clock
Date
Time
Time Zone
Sets the language used on the LCD and Configuration Web.
Sets the time length before the unit enters sleep mode. (1 to 240
minutes)
Sets the power auto-off function. (15 minutes to 72 hours)
Sets the LCD contrast. (5 levels)
Enables (On) or disables (Off) the settings.
Selects whether the [Scan] counter or the [System] counter is displayed
on the LCD during scanning.
Select a date format from YYYYMMDD, MMDDYYYY or DDMMYYYY.
The number of documents scanned during the scanning process.
This counter is cleared each time you start scanning.
The number of documents scanned by the scanner since it was shipped
from the factory.
The number of documents scanned since clearing the counter after
cleaning the rollers. Clear after cleaning the rollers.
The number of documents scanned since clearing the counter after
replacing the rollers. Clear after replacing the rollers.
You can change the number of documents scanned before the Roller
Cleaning Notification occurs, if necessary.
You can change the number of documents scanned before the Roller
Replacement Notification occurs, if necessary.
If [Use the PC clock] is selected, the scanner will get the date and time
from the computer when you click [Submit].
After you click [Submit], the check box is cleared automatically.
Select a value from the list.
Select a value from the list.
Set your time zone.
16
Contents
Contents
Contents