Table of Contents
Advertisement
INSPECTION DETAILS - C. LEFT FRONT
d ) Side Support Adjustment *
DRIVING POSITION MEMORY SYSTEM
a ) With the "POWER" switch in the "ON" mode and the
shift lever in the "P" position, check the operation:
1. Adjust the driver's seat and outside rear view mirrors
to the desired positions.
2. While pressing the "SET" button, press down the
button "1", "2" or "3" until a beep is heard.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
b ) With the shift lever in the "P" position, close the driver's
door and turn the "POWER" switch to "ON" mode.
1. Register a driving position to the button "1", "2" or "3".
2. Do not carry more than one key (including a card
key*) when registering. While pressing the button "1",
"2" or "3", press the driver's door lock switch (either
lock or unlock switch) until a signal beeps.
3. Unlock the driver's door using the entry function or
wireless remote control, open the driver's door, and
check that the stored driving position is recalled.
13
* If equipped
GS350/GS450h
Hide quick links:
Advertisement
Table of Contents
