Dmx Linking; Dmx Values - Chauvet Shocker 2 Quick Reference Manual

MODE
LED Frequency
Fan Mode
Back Light
DMX Fail

DMX Linking

The Shocker 2 can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation
are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 509.
Master/Slave Connection
The Shocker 2 uses the DMX data connection for its Master/Slave mode. Information about configuring the Shocker 2 for
Master/Slave operation is in the User Manual, which is available from the Chauvet website.

DMX Values

8Ch
CHANNEL FUNCTION
1 Dimmer
2 White 1
3 White 2
4 Strobe
Shocker 2 QRG Rev. 1
QUICK REFERENCE GUIDE
PROGRAMMING LEVELS
600Hz
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Auto
On
On
10S
20S
30S
Hold
Blackout
VALUE
000

000

000

000

011

133

DESCRIPTION
Selects the PWM output frequency
Fan control
Display backlight always on
Turns off display backlight after 10 sec of
inactivity
Turns off display backlight after 20 sec of
inactivity
Turns off display backlight after 30 sec of
inactivity
Continues last command upon loss of DMX
signal
Blacks out product upon loss of DMX signal
PERCENT/SETTING
255 0–100%
255 0–100%
255 0–100%
010 No function
132 Strobe, slow to fast
255 Random strobe macros
EN
6