Buzzers, Bells & Wall Clocks - Pyramid 4000Pro User Manual

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 4000Pro/5000
SET EVENT
MENU : SET EVENT
SCHEDULE AN EVENT (e.g. Ring Internal Buzzer/External Bells)
FeATuRe
(SeLeCT)
Set event
Schedule
Assign the
event a
Number (1-50)
Set the
event's
Duration
Set the
event's Hour
Set the
event's Minute
Set the
event's Day
CONNECTING BELL AND/OR EXTERNAL CLOCKS
The time clock is able to send time signal to TimeTrax™ Sync 5200N Analog Clock or DIG4B
Digital Clock. TimeTrax™ Sync wall clocks can be used alone, or in conjunction with
TimeTrax™ Sync 5300 Bell Ringer.
1 Locate RJ-45 jack at back (4000Pro/5000+) or side (5000+HD) of time clock &
connect cable (sold separately).
2
Connect other end of cable to Pyramid 5200N Analog Clock(s) and/or Digital
Clocks (DIG4B, 41357G) (diagram A). If using TTSync 5300 Bell Ringer and Clocks,
connect RJ-45 cable to T-Connector (part #41270 sold separately) and connect
to bell transformer and clock (diagram B). Follow Bell Ringer steps 3-5 on
previous page.
Plug wall clock into AC wall outlet.
3
pyramidtimesystems.com
/5000 HD
+ +
st
DISPLAy DeFAuLT SeTTINg
NO
OFF
12 HR: 12AM
24 HR: 00
00
ALL
OPTIONS (SCROLL st)
Scroll s(UP) or t(DOWN) to
schedule event
SET EVENT
(e.g.1, 2, 3 ... 50)
OFF, .5 SEC, 1-15 SEC (determines
length of time buzzer/bell sounds)
EVENT HOUR +/– One Hour
12 HR: 12AM-11PM
24 HR: 00-23
EVENT MINUTE +/– One Minute
(e.g. 00, 17, 59)
One day event: SUN, MON, TUE, WED,
THU, FRI, SAT
All week event, SUN-SAT: ALL
Monday thru Friday Event: M-F
Connector
BUZZERS, BELLS & WALL CLOCKS 11