Operating Via Guarding Vision App - HIKVISION DS-2CD2432F-IW Quick Start Manual

6 Operating via Guarding Vision App

Purpose:
Guarding Vision is an application for mobile devices. With the App,
you can view live image of the camera, receive alarm notification
and so on.
Note:
Guarding Vision service is not supported by certain camera models.
6.1 Enable Guarding Vision Service on Camera
Purpose:
Guarding Vision service should be enabled on your camera before
using the service.
You can enable the service through SADP software or web browser.
6.1.1 Enable Guarding Vision Service via SADP Software
Steps:
1. Check the checkbox of Enable Guarding Vision on:
"Activate the Device" page during camera activation, refer to
1).
Chapter 4.2.2.
Or "Modify Network Parameters" page during modifying IP
2).
address, refer to Chapter 4.3.
2. Create a verification code or change the verification code.
Network Cube Camera·Quick Start Guide
31