HIKVISION DS-2CD2432F-IW Quick Start Manual page 34

Steps:
1. Access the camera through web browser. Refer to Chapter 5.
2. Enter platform access configuration interface: Configuration >
Network > Advanced Settings > Platform Access
Figure 6-2
3. Select Platform Access Mode as Guarding Vision.
4. Check the checkbox of Enable.
5. Click and read "Terms of Service" and "Privacy Policy" in pop-up
window.
6. Create a verification code or change the verification code for the
camera.
Note:
The verification code is required when you add the camera to
Guarding Vision app.
7. Save the settings.
Network Cube Camera·Quick Start Guide
Guarding Vision
dev.guardingvision.com
Platform Access Configuration (Web)
33