Adjustment To Head Measurement - Atmos HL 21 LED Operating Instructions Manual

4.0 Setting up and starting up


4.2 Adjustment to head measurement (contin.)
 Take one of the enclosed connecting cables and join it with the headlight connection
(, fi g. 3).
 Use the short connecting cable if you want to carry the LED battery on the headband.
(fi g. 8, page 11).
 Use the long connecting cable if you want to carry the LED battery in your coat pocket, in your trouser
pocket or on your belt. This cable is also to be used if the headlight is to be
supplied from an ATMOS current source. If necessary, lead the cable under the front pad
and through the cable holders in the joint of the headlight ATMOS HL 21 LED.
 Use the enclosed cable clip (, fi g. 3) to fi x the long cable on your clothes.
 Join the other end of the connecting cable with the socket on the rechargeable
LED battery (fi g. 4) or with the current source in your ATMOS ENT examination unit.
 Note: By means of its rear cable clip, the rechargeable LED battery can be fi xed to your coat pocket, to
your belt or to the battery holder on the headlight ATMOS HL 21 LED.

Fig. 3.





Cable holder
Cable clip
Front pad
headlight connection
Fig. 4. Connection of
LED battery
9