Setting Up And Starting Up - Atmos HL 21 LED Operating Instructions Manual

4.0 Setting up and starting up



Fig. 5.

Test button

Indication of battery capacity (green LED
4.3 Functionality of the rechargeable LED battery
4.3.1 Capacity indication
Charging of the LED battery must be checked regularly as the light expires Charging of the LED battery must be checked regularly as the light expires
very fast when the battery gets fl at. We recommend to change resp. charge very fast when the battery gets fl at. We recommend to change resp. charge
the battery when the capacity is <50%. the battery when the capacity is <50%.
 As long as the test button (, fi g. 5) of the rechargeable LED battery is pressed, the battery capacity is
shown for about 3 seconds (, fi g. 5, green LEDs for levels 1 ... 5).
4.3.2 Charging the LED battery
 Use the primary adapter fi tting your power supply (Euro/US/ UK/Aus). See information
enclosed to the charging power pack.
 To charge the LED battery, separate it from the headlight ATMOS HL 21 LED.
 Join round connector of the power pack cable with the socket (, fi g. 6) on
the LED battery.
 During the charging process, the current battery capacity is indicated
(, fi g. 5, LEDs for levels 1 ... 5). The battery is fully charged when all 5 LEDs expire again.
During charging, operation of the headlight is impossible! During charging, operation of the headlight is impossible!
10

Fig. 6.

Connecting socket for headlight

)
Charging socket on LED battery
