Description Of Parts; Instructions For Use; Charging The Speaker - SoundLogic FIREFLY FFS-12/0875 Instruction Manual

Description of Parts:
S. No.
1
2
3
4
5
6 MFP button (Power / Play / Pause)
INSTRUCTIONS FOR USE
Charging the speaker
For best results, fully charge the speaker before its first use.
1. Connect the USB charging cord (included) to the DC 5V charging port of the
speaker and insert the other end into a port on your computer or similar power
source.
2. Red LED glows indicating that the battery is being charged. Once it is fully
charged, the Red LED will turn off. It takes about 2 hours to fully charge the
battery.
3. Once the speaker is fully recharged, disconnect the USB Cable and firmly close
the Rubber Flap, to cover the USB Charging Port secure. If the USB charging port
is not securely covered, water may seep into the electronics circuit and may
damage the unit. This damage will NOT be covered under product warranty.
Description
Silicon Lanyard
Speaker
Charging Port
Rubber Flap
LED Light
3