Color Changing Led Lights (Leds Are Not Replaceable); Specification; Troubleshooting; Care And Maintenance - SoundLogic FIREFLY FFS-12/0875 Instruction Manual

Color changing LED lights (LEDs are not replaceable)
1. Turn on the speaker.
2. Short press the MFP button twice to switch to Auto color changing mode.
3. Then, short press the MFP button twice each time to different light modes. The
light modes include: Blue ‐> White ‐> Red ‐> Green ‐> Yellow ‐> Purple ‐> Cyan ‐>
Auto color changing (slow) ‐> Auto color changing (fast).
Tips!!
When the unit is not in use, turn OFF the device to save the battery power.
Specification
Bluetooth version
Speaker
Unit Size
Unit Weight
Play time
Charge Voltage
Fully charging time
Bluetooth Range
Built‐In Rechargeable
Battery
(Note: Battery life & charging time may vary, based on usage & types of devices used.)
Troubleshooting
Problem
Low sound level
Sound distorted
No sound at all.
Care and Maintenance
Clean the unit with a soft, damp cloth. Never use chemicals or hard abrasives.
Keep this unit away from wet or damp surroundings.
: 3.0+EDR
: 3 Watts
: 2.3"x2.3"x3.9"
: 3.2 oz
: 2 to 3 hours
: DC5V (USB)
: about 2 hours
: 26‐33 Feet
: 3.7V / 400mAh
Possible Cause
Source (Tablet, Mobile Phone,
Laptop, etc.) volume too low.
Battery dead
Battery nearly dead
Source (Tablet, Mobile Phone,
Laptop.) turned off.
Speaker turned off.
Volume turned down source.
Media paused on source.
Solution
Adjust source volume.
Charge Battery.
Charge Battery.
Turn the source on.
Turn the speaker on.
Adjust volume source.
Play media from source.
5