Description Of Parts - SoundLogic SBS-6/6096 Instruction Manual

Description of parts

S. No.
1 Power Button
2 Mode / Charging LED Indicator
3 Play / Pause Button
4 Skip Backward / Lower Volume
5 Answer Call / End Call Button
6 Built-In Microphone
INSTRUCTIONS FOR USE
Charging the speaker
For best results, fully charge the unit before its first use
1. Connect the USB cord to the charging port of the speaker and insert the other
end into a USB port on your computer or a similar power source.
2. When the Charging LED Light turns RED, it indicates the speaker is charging.
Once fully charged, the red LED light will turn off.
3. It will take 3 to 4 hours to fully charge the speaker.
4. Once the speaker is fully recharged, disconnect the USB Cable and firmly
close the USB Charging Port with the Rubber Flap. If the USB charging port is
not securely covered, water may seep into the circuitry and may damage the
unit. This damage will NOT be covered under product warranty.
Note: When the speaker is running on low battery, you will hear Low battery warning.
Please recharge the device.
Description S.No.
7 Skip Forward / Higher Volume
8
9 Suction Cup Holder
10
11
12
4
Description
Speaker
Suction Cup
Rubber Flap
Charging Port
.