Related Manuals for SoundLogic FIREFLY FFS-12/0875
Summary of Contents for SoundLogic FIREFLY FFS-12/0875
- Page 1 FIREFLY Water Resistant Wireless Speaker with Color Changing LED Lights FFS‐12/0875 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE ...
- Page 2 Getting Started Remove the speaker from the box. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents Water Resistant Wireless Speaker with Color Changing LED Lights USB charging cable Instruction manual Features Bluetooth Water Resistant Speaker with Color Changing LED Lights Connects to any Bluetooth enabled devices Streams wireless music from your iPhone, iPad and other Android/Windows smartphones and tablets Built‐in color changing lights Built‐in rechargeable battery ...
- Page 3 Description of Parts: S. No. Description 1 Silicon Lanyard 2 Speaker 3 Charging Port 4 Rubber Flap 5 LED Light 6 MFP button (Power / Play / Pause) INSTRUCTIONS FOR USE Charging the speaker For best results, fully charge the speaker before its first use. 1. Connect the USB charging cord (included) to the DC 5V charging port of the speaker and insert the other end into a port on your computer or similar power source. 2.
- Page 4 Turn On/Off the Speaker Press and hold the MFP button (Power) for 2‐3 seconds until you hear the indication tone. Blue LED light will blink, your speaker is now ON and is entering “pairing” mode. Press and hold the MFP button (Power) for 2‐3 seconds to turn off the speaker. Turn the speaker to Bluetooth pairing mode ‐ 1. Press and hold the MFP button (Power) for 2‐3 seconds until you hear the indication tone. 2. Blue LED light will blink, your speaker is now ON and is entering “pairing” mode. (Note: Speaker automatically pairs with the previously paired devices) Pairing your device with Bluetooth Speaker – Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device within the distance of 26‐33 Feet. Simply follow the below steps. 1. Press and hold the MFP button (Power) for 2‐3 seconds until you hear the indication tone. ...
-
Page 5: Troubleshooting
Color changing LED lights (LEDs are not replaceable) 1. Turn on the speaker. 2. Short press the MFP button twice to switch to Auto color changing mode. 3. Then, short press the MFP button twice each time to different light modes. The light modes include: Blue ‐> White ‐> Red ‐> Green ‐> Yellow ‐> Purple ‐> Cyan ‐> Auto color changing (slow) ‐> Auto color changing (fast). Tips!! When the unit is not in use, turn OFF the device to save the battery power. Specification Bluetooth version : 3.0+EDR Speaker : 3 Watts Unit Size : 2.3”x2.3”x3.9” Unit Weight : 3.2 oz Play time : 2 to 3 hours Charge Voltage : DC5V (USB) Fully charging time : about 2 hours Bluetooth Range : 26‐33 Feet Built‐In Rechargeable Battery : 3.7V / 400mAh (Note: Battery life & charging time may vary, based on usage & types of devices used.) Troubleshooting ... - Page 6 FCC Instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ...
- Page 7 WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for manufacturer any other liability in connection with the sale of our products. There shall be no claims for defects or failure under any theory of tort, contractor commercial law including but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of contract. Under no circumstances will Manufacturer’s / Distributor’s maximum liability exceed the retail value of the product. WARRANTY PERFORMANCE: During the above 90 day warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at manufacturer's option). The repaired or replacement product will be in warranty for the balance of the 90 day warranty period and an additional one‐month period. No charge will be applicable for such repair or replacement. SERVICE AND REPAIR: If service is required for this product, you should first contact Midwest Trading Group Customer Service at info@mtradinggroup.com or by calling 1 (866) 815‐4714, Monday to Friday 10am to 6pm EST. NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a ...
- Page 8 Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the FIREFLY FFS-12/0875 and is the answer not in the manual?
Questions and answers