Table of Contents
Advertisement
SASSAFRAS SUPER SIZE LOG PLACEMENT
your hands gently with soap and water.
All Logs
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are
Refer to Figure 1 for the following warning.
Warning:
appliance may result in property damage or personal injury.
PROPER INSTALLATION SEQUENCE:
LS-(18, 24, 30)RSS
(Figure 1)
support.
pan.
pan.
8. Compare the completed log installation with the appropriate
photo from pages 6 through 8. Review previous steps to make
any necessary adjustments.
9. Log placement is completed.
Attention: Do not use Figure 1 to order replacement logs. Refer to
Page 13 Parts List and Parts View to order logs for your appropriate
model number.
Apply loose material (glowing embers) per appropriate Installation
adversely affect performance of the heater.
WARNING: All previously applied loose material must be removed
prior to reapplication.
Replacement Loose Material (glowing embers) Part Number
LS-18RSS
LS-24RSS
LS-30RSS
Platinum Bright Embers
Note: A single layer of embers is to be used when applying Platinum
Bright Embers (alone or in combination with production embers)
to the burner.
28189-0-1210
15999
15970
15970
PE20-1
Log Placement
LS-(18, 24, 30)RSS Logs
The following WARNING applies when log set is installed onto an
unvented gas burner assembly.
propane) gas. Field conversion is not permitted.
Figure 1
Page 5
Advertisement
Table of Contents
