Unpacking And Installation - Barnstead SUPER-NUOVA HP133420-33 Operation Manual And Parts List

Unpacking and Installation

Warning
Use a properly grounded electrical
outlet of correct voltage and current
handling capacity.
Do not remove or modify grounded
power plug. Use only properly ground-
ed outlets to avoid shock hazard. Not
rated for use in hazardous atmos-
pheres.
Do not use in the presence of flamma-
ble or combustible materials; fire or
explosion may result. This device con-
tains components which may ignite
such materials. If explosion proof mod-
els are required, contact Barnstead
International at 1-800-553-0039 for
more information.
Do not use in highly corrosive atmos-
pheres; corrosive fumes and spills
may damage top and internal compo-
nents, creating shock hazard.
Note
Some misalignment of the motor bear-
ings in this product may have occurred
during shipping. Prior to using this
product, run the stirrer at maximum
speed for ten minutes to realign the
bearings.
Unpacking
Remove your SUPER-NUOVA plate from the carton.
Inspect to ensure that the unit has not been damaged
during shipment. If the unit appears to have sustained
shipping damage contact the distributor from whom you
purchased this product or Barnstead International
Customer Service at 800-553-0039. Check for stir bar,
remote probe and thumbscrew prior to discarding packag-
ing.
The following items are included in the shipment:
SUPER-NUOVA Hot Plate or Stirring Hot Plate
Stir Bar - ZSX65A
Adapter (100V models only) - CEX42
Remote Probe - TCX16
Knob - KBX106
Operator's Manual - LT1335X1
If any of these items are missing from the carton, contact
Barnstead International.
Installation
Set the unit on a flat stable surface at least 12" away from
combustible materials, and plug the cordset into a proper-
ly grounded electrical outlet of correct voltage and current
handling capacity.
9