Table of Contents
Advertisement
Caution
Allow at least three inches of space
between the hot p!ate and any vertical
surface.This permits the heat from hot
plate to escape so as not to create a
possible fire hazard.
Gross weight of items placed on top of
the hot plate should not exceed 35 lb.
Warning
To avoid electrical shock, this unit
must always use a properly grounded
electrical outlet with correct voltage
and current handling capacity.
Installation
Site Selection
Install hot plate on a sturdy surface and allow space for
ventilation.
The electrical specifications are listed on the specification
plate on the side of the hot plate. Consult Barnstead
International if your electrical service is different than
those listed on the specification plate. Prior to connecting
your Type 2600 hot plate to your electrical supply, be sure
the dial switch is in the OFF position.
7
Advertisement
Table of Contents
