Timer Shutdown - End - Barnstead SUPER-NUOVA HP133420-33 Operation Manual And Parts List

Hot Top Warning System is indicating a hot sur-
face), enter the Service Menu by pressing and
holding the POWER key. After about 3 seconds
a single beep will be heard and you may
remove your finger from the POWER key. The
display will change to OSP.
2. Rotate the center knob until the display reads
Prb. Press the SET key under the HEAT display
to accept, and the display will change to OFF.
Rotate the center knob one position to change
the display to On and press the SET key under
the HEAT display again.
3. The unit will re-start and when done initializing,
will now be in Thermometer Mode. The SET
key under the HEAT display will have no affect
while in Thermometer Mode.
4. To return to normal operation, press the
POWER key, and the unit will turn OFF. When
the unit is turned back ON, it will be back to nor-
mal operation.

Timer Shutdown - End

This feature is available for all units, but not all sub-menu
options will be applicable. The purpose of this feature is
to control what is turned off when the timer elapses. The
default is Heating off for hot plates and stir plates.
To modify/view the Timer Shutdown follow the instructions
given below:
1. Plug the unit into the appropriate power, but do
not turn it ON (displays should be blank, unless
Hot Top Warning System is indicating a hot sur-
face), enter the Service Menu by pressing and
holding the POWER key. After about 3 seconds
a single beep will be heard and you may
remove your finger from the POWER key. The
display will change to OSP.
2. Rotate the center knob until the display reads
End. Press the SET key under either display to
S C
ERVICE AND ALIBRATION
27