Barnstead SUPER-NUOVA HP133420-33 Operation Manual And Parts List page 20

O
PERATION
20
5. Select FILE, SAVE AS, and save this setup
wherever you would like it to be located (if you
would like it on the Desktop, select Desktop)
and select SAVE. You will be able to run
HyperTerminal with this setup in the future by
just double-clicking the icon if you put it on the
Desktop.
6. The setup of HyperTerminal is now complete,
you can view the past data, but the program will
only allow you to see the past 500 lines in its
buffer. To capture data permanently follow the
Capture with HyperTerminal Instructions below.
To Capture Data With HyperTerminal
1. Start HyperTerminal by double-clicking on the
Icon created in the Setup Procedure above.
2. Select TRANSFER, CAPTURE TEXT. Select
the Folder and File name you would like to use
to refer back to this data (example:
C:\SuperNuova\ Test1.txt). It is important to use
the txt extension so that when you double-click
on the file at a later date, it will automatically
open in a text viewing program, or it use the csv
extension and it can be opened in a spread-
sheet such as Excel.
3. The hot plate can be operated and the data will
be stored (it is still viewable on-screen) to the
file that was setup in the previous step.
4. The data file must be closed at the end of the
day (or the end of the capturing session) by
selecting TRANSFER, CAPTURE TEXT, STOP.
The data file must be closed before shutting
down the computer also.
5. The program may be exited by selecting FILE,
EXIT. Select YES to the question "ARE YOU
SURE YOU WANT TO DISCONNECT NOW?".