Advertisement
SLM3 WIRED CONTROLLER
1. "ON/OFF" switch
• Press to start the air conditioner unit.
• Press again to stop the unit.
2. Temperature setting
• Set the desired room temperature.
• Press button to increase or decrease the set tem-
perature. Setting range are between 16°C to 30°C
(60°F to 80°F).
3. Operation Modes
• Press the "mode" button for select the type of oper-
ating mode.
- Cooling Only :
COOL, FAN, DRY
- Heat Pump :
COOL, FAN, DRY, HEAT
4. Fan Speed selection
• Press the button until the desired fan speed is
achieved.
5. Timer
• Press the set button to select the switch timer of the
air conditioner unit (the setting range is between 1
to 15 hours).
SLM3
24
AC5300
6. "Sleep" mode
• Press button to activate the sleep function. This
function can only be activated under "cool" or
heating mode operation. When it is activated
under "cool" mode operation, the set tempera-
ture will increase 0.5°C after 30 minutes, 1°C
after 1 hour and 2°C after 2 hours. If it is acti-
vated under "HEAT" mode operation, the set
temperature will be decreased 0.5° C after 30
minutes, 1° C after 1 hour and 2° C after 2 hours.
7. Air Swing
• Press button to activate the automatic air swing
function.
8. Sensor
• Infra red sensor to receive signals from wireless
controller.
9. LED display
• To display the set temperature (in º C) and timer
delay setting (in hours).
10. Transmission source
• To transmit signals to the air conditioner.
Advertisement
