Headset Pairing - HyperX HX-HSCF-BK/AM User Manual

Headset pairing

The headset and USB wireless adapter comes paired and ready to use from the factory. If the
headset loses pairing it can be re-paired manually using the steps below (It is recommended to
contact technical support prior to re-pairing to determine if this is necessary)
1. Turn off the headset.
2. Long press the power button for 10 seconds to enter the pairing mode.
3. The headset ear cup LED will be fast blinking.
4. Plug the USB wireless adapter to a PC.
5. Use a small pin to press the small button on the back side of the USB wireless adapter.
6. The USB wireless adapter LED will be fast blinking.
7. When the LED on the USB wireless adapter and the headset ear cup is solid, pairing is
completed.
Document No. 480HX-HSCF001.X01 HyperX Cloud Flight Headset Page 19 of 14