C. Mic mute / mic monitoring button Wireless pairing pin hole D. Volume wheel J. Wireless status LED E. USB-C charge port K. USB-C charge cable F. Microphone port L. DTS instruction card Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 3 of 17...
Page 5
Weight with microphone: 294g Cable length(s) and type(s): 0.5m USB charge cable *Tested at 50% headphone volume. Battery life varies depending upon the usage. **Wireless range may vary due to environmental conditions. Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 5 of 17...
Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click Speaker icon > Select Sounds Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 6 of 17...
Page 7
4. Under the Playback tab, click on “HyperX Cloud Core Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “HyperX Cloud Core Wireless” and click on the Set Default button. Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless...
Page 8
6. Under the Playback tab, verify that “HyperX Cloud Core Wireless” is set as Default Device. Under the Recording tab, verify that “HyperX Cloud Core Wireless” is set as Default Device. The Set Default button should also be grayed out when selecting these devices under the Playback tab and the Recording tab.
Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud Core Wireless) 2. Set Output Device to USB Headset (HyperX Cloud Core Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum level.
Setting up with PlayStation 5 1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: • Input Device to USB Headset (HyperX Cloud Core Wireless) Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 10 of 17...
Page 11
3. Under Audio Output, set the following: • Output Device: USB Headset (HyperX Cloud Core Wireless) • Output to Headphones: All Audio 4. Under Volume, set Headphones slider to maximum level. Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 11 of 17...
• Press button once to see the battery level status on the status LED o The status LED will automatically turn off after 5 seconds to conserve battery life Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 12 of 17...
• Scroll wheel up and down to adjust volume level WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 13 of 17...
10% - 99% battery level Breathing red < 10% battery level Wired charging To charge the headset, plug the headset to a USB port with the included USB-C charge cable. Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 14 of 17...
1. On Windows 10, open the Microsoft Store app. 2. In the app store search bar, type “DTS Sound Unbound” and search for the app. 3. Download and install the “DTS Sound Unbound” app. Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 15 of 17...
Page 16
DTS Sound Unbound app or through the Sound icon shortcut in the taskbar. To enable DTS Headphone:X through the taskbar, follow the steps below: • Right click Speaker icon > Select Spatial sound > Select DTS Headphone:X Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless Page 16 of 17...
3. Wait until both the headset LED and the USB adapter LED are solid. The headset and USB adapter are now paired together. Questions or Setup Issues? Contact the HyperX support team at: hyperxgaming.com/support/ Document No. 480HX-HHSC1C.A01 HyperX Cloud Core Wireless...
Need help?
Do you have a question about the Cloud Core Wireless and is the answer not in the manual?
Questions and answers