TRAINING MANUAL
Minimum clearances must be observed, particularly if the dryer is installed in a closet or a
laundry alcove. The dryer is essentially an air pump moving 150 cfm (cubic feet per
minute) and that air must come from somewhere for the dryer to operate properly.
Additional air must be supplied to support proper combustion for gas models.
WM2801H*A
INSTALLATION
INSTALLATION
Page 15
(Stacking Kit) continued
Install the front rail of the stacking kit. Push
the front rail back against the stops on the
side brackets.
Insert a screw to attach the front rail to the
side bracket.
Insert the other screw for the other side.
Tighten the leg down about half a turn to
put a little tension between the dryer and
the bracket to prevent rattling and
vibration.
(Makeup Air)
WM2801H*A
Washing Machine