Parts Identification - LG WM2801H Series Training Manual

TRAINING MANUAL WM2801H*A

PARTS IDENTIFICATION

The air vent on the back of the machine must be left open and clear at all times.
If the washer and dryer are installed in a closet or closed laundry alcove, there must be
sufficient clearance and ventilation. The closet should have a full louvered door with at
2
least 650 square inches (0.5 m ) of open area for ventilation.
The washer requires a space of at least 1 inch (2.5 cm) between the wall and the
machine on each side and at least 4 inches (10 cm) between the back of the washer and
the wall. Additional space may be needed for servicing.
The following dimensional drawings show the space needed for various installations.
WM2801H*A Page 12 Washing Machine