Pumps And Filter Housing - LG WM2801H Series Training Manual

TRAINING MANUAL

PUMPS and FILTER HOUSING

WM2801H*A
Remove the front cabinet. (See pages 45
and 46.)
Drain the water from the sump.
Remove the clamps and hoses.
Since the pump sits on a platform
assembly, no screws are used to attach it
to the front of the machine frame.
Both the drain pump (left) and the
circulation pump (right) are mounted on
the filter housing. The entire pump
assembly is then mounted on a suspension
plate base attached to the washer base by
three antivibration bushings and 10 mm
bolts. Use a socket and a short extension
to remove the pump assembly.
The small hose is to allow draining the
sump before servicing the washer.
Bottom view of the pump and filter
assembly, showing the antivibration
bushings and bolts and the two screws that
hold the pump assembly to the base.
Removing the three large bolts allows the
entire assembly to be tilted so either pump
can be serviced without further
disassembly.
Page 48
WM2801H*A
Washing Machine