High Frequency; Owner Recognition - Avital 3300 Owner's Manual

Avital automobile alarm user manual
Hide thumbs Also See for 3300:
Table of Contents

Advertisement

trol unit and fail to operate the system. To re-sync the remote sim-
ply press
several times within range of the vehicle. The alarm
will automatically re-sync and respond to the transmitters normally.

High Frequency

Your system transmits and receives at 434 MHz. This provides a cleaner
spectrum with less interference and a more stable signal. Enjoy a phe-
nomenal increase in range, even in areas with high radio interference.

Owner Recognition

Owner Recognition is a revolutionary new feature available only
from DEI
®
. Using a DEI
dealer can program many of the system settings. The programmer
makes it possible to program different settings for each transmit-
ter that is used with the system. Then, whenever a specific trans-
mitter is used, the system will recall the settings assigned to that
transmitter. Owner Recognition lets up to four users of the system
have different settings that meet their specific needs. It is almost
like having four separate alarms in your vehicle, one for each user.
NOTE: Owner Recognition cannot be programmed without a Bitwriter and
the necessary software. Check with your dealer for more information.
2000 Directed Electronics, Inc.
©
®
Bitwriter, hand-held programming tool, your
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF