Advertisement
Quick Links
Advertisement
Related Manuals for JL Audio C7-100ct
Summary of Contents for JL Audio C7-100ct
- Page 1 OWNER’S MANUAL 1-inch (25 mm) Component Tweeter...
- Page 2 Suspension Design: development tools. The diaphragm’s motion is centered, sprung 30 deg. The C7-100ct is a component tweeter designed to and damped by a treated silk, s-roll surround. deliver unparalleled high-frequency performance. 45 deg. Ferrofluid in the magnetic gap acts as a rear Utilizing a corundum ceramic-coated aluminum suspension element in this design.
- Page 3 With 24 dB/octave filters: 4 kHz - 30 kHz With 12 dB/octave filters: 5 kHz - 30 kHz INCLUDED COMPONENT & PARTS • One (1) C7-100ct 1.0-inch (25 mm) tweeter Tweeter C7 2-Way Speaker System • One (1) surface-mount fixture C7-650cw Woofer •...
- Page 4 C7-100ct: Dimensions 2.13 in. 54 mm .33 in. 8 mm 1.06 in. 27 mm .73 in. 19 mm 1.88in. 2.16 in. 48 mm 55 mm...
- Page 5 Diagram A. Failure to tweeters to a panel that has insufficient clearance C7-100ct should be installed in a dry location and connect the protection capicitor as shown will result behind it for the tweeter’s magnet structure.
- Page 6 C7-100ct: Surface-Mount Installation 1) Remove the vehicle panel and check to ensure that the mounting screw will have adequate clearance. 2) Place the surface-mount fixture on the vehicle panel at the desired mounting location and mark the locations of the center mounting screw hole and the approximate center of the left and right semicircular cutouts (for the wires).
- Page 7 C7-100ct: Flush-Mount Installation 1) Remove the vehicle panel and check the desired mounting location to ensure that there is adequate clearance behind the panel for the tweeter’s magnet structure and mounting hardware. 2) Carefully cut a 1.88-inch (48 mm) diameter hole in the vehicle panel.
- Page 8 JL AUDIO JL AUDIO will, at its discretion, repair or replace the defective product with new with a valid return authorization number. Warranty expiration on products or remanufactured product at no charge.