Page 2
INCLUDED COMPONENT & PARTS distortion at higher listening levels. • One (1) C7-350cm 3.50-inch (190 mm) midrange Chassis Design: • One (1) die-cast aluminum grille tray A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize •...
Page 3
C7-350cm: Specifications and Crossover Setting Guidelines C7-350cm SPECIFICATIONS Speaker Type: Component Midrange Nominal Diameter: 3.5 in. (90 mm) Nominal Impedance (Znom): 4 ohms Continuous Power Handling: 100W Recommended Amplifier Power: 50-150W (RMS) Tweeter Net Weight: 0.71 lbs. (0.32 kg) Driver Rear Displacement: 0.0024 cu.ft. (0.068 liters) Min.
Page 4
C7-350cm: Dimensions 3.95 in. 100 mm 0.58 in. 15 mm 3.15 in. 2.87 in. 3.45 in. 1.47 in. 80 mm 73 mm 88 mm 37 mm 2.25 in. 57 mm...
Page 5
These materials can easily be snagged by a drill or negative terminal of the C7-350cm. distortion. For optimum performance, we strongly on your woofers.
Page 6
C7-350cm: Installation Diagram C: Factory Location Speaker Installation WA R N I N G Hand-tighten the screws evenly in a criss-cross pattern to avoid bending the speaker frame or stripping the mounting screw holes. Diagram D: Custom Location Speaker Installation...
Page 8
JL AUDIO JL AUDIO will, at its discretion, repair or replace the defective product with new with a valid return authorization number. Warranty expiration on products or remanufactured product at no charge.