Unpacking And Installation - OEM SST-MT-PSW24 Quick Installation Manual

3. Unpacking and Installation

Open the received cartons of the 24-ports 10/100 Ethernet PoE Switch and carefully
unpack its contents. The cartons should Included following
items:

One 24-Ports 10/100M Ethernet PoE Switch.

One AC power cord.

Four rubber feet with adhesive backing.

Mounting kit (two brackets and screws)

Quick Installation Guide.
If any item is found missing or damaged,
please contact your local reseller for replacement.
4. System Requirements
•Installation:
The installation of the 24-ports 10/100 Ethernet PoE Switch requires the following steps:
 A computer with a 10/100Base-T network adapter installed.
 The surface must support at least 6.0Kg (13.2 lbs) for the switch.
 The power outlet should be within 1.5 meters (5 feet) of the switch.
 Visually inspect the AC power cord and make sure that is fully secured to the power outlet.
 Make sure that there is proper heat dissipation from and adequate ventilation around the
switch. Do not place heavy objects on the switch.
24-Port 10/100M Ethernet PoE Switch
24-Port 10/100M Ethernet PoE Switch/AT
Rev 1.0 04/10/2012 Page 3 / 8
Rev 1.0 05/30/2011 Page