Table of Contents
Advertisement
5. Hardware Installation
A: Connect the AC Power Cord to the 24-Ports 10/100M Ethernet PoE Switch and then to
a power outlet.
AC power
Outlet
AC Power Cord
B: Connect a CAT-5, CAT-5e or CAT-6 RJ-45 network cable from the computer to an
available Ethernet port on the 24-Ports 10/100M Ethernet PoE Switch.
C: Installing 24-Ports 10/100M Ethernet PoE Switch on a Desktop:
When installing the 24-Ports 10/100M Ethernet PoE Switch on a desktop or shelf, the
rubber feet Included with the 24-Ports 10/100M Ethernet PoE Switch should first be attached.
Attach these cushioning feet on the bottom at each corner of the device.
D: Installing the 24-Ports 10/100M Ethernet PoE Switch on a 19" Rack:
Fasten the mounting brackets to 24-Ports 10/100M Ethernet PoE Switch using the screws
provided. With the brackets attached securely, you can mount 24-Ports 10/100M Ethernet
PoE Switch series in a standard rack as shown on the following page.
24-Port 10/100M Ethernet PoE Switch
Rev 1.0 04/10/2012 Page 4 / 8
Advertisement
Table of Contents
