Desktop Installation - OEM 24FE+2GE+2G SFP User Manual

3. Installation the Switch
This part describes how to install your Ethernet Switch and make connec ons to it. Please follow the
following instru ns in avoid of incorrect installa on causing device damage and security threat.
 Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet
cloth or liquid;
 Do not place the switch near water or any damp area. Prevent water or moisture from entering the
switch chassis;
 Do not place the switch on an unstable case or desk. The switch might be damaged severely in case of a
fall;
 Ensure proper ven la on of the equipment room and keep the ven
obstruc on;
 Make sure that the opera ng voltage is the same one labeled on the switch;
 Do not open the chassis while the switch is opera ng or when electrical hazards are present to avoid
electrical shocks.

3.1Desktop Installation

Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at
each corner of the Switch in case of the external vibration. Allow adequate space for ventilation
between the device and the objects around it.
- 5 -
vents of the switch free of