Related Manuals for OEM 24FE+2GE+2G SFP
Summary of Contents for OEM 24FE+2GE+2G SFP
- Page 1 User Guide 24FE(PoE)+2GE+2G SFP 24FE +2GE+2G SFP PoE Switch PoE Port 1-4: Max 60W,PoE Port5-16/20: Max 32W...
-
Page 2: Package Contents
If any part is lost and damaged, please contact your local agent immediately. 1. Introduction 24FE+2GE+2G SFP PoE switch is 16/ 24-port 10/100Mbps PoE switch with 2-port 10/100/1000Mbps and 2 Gigabit SFP Slots. The PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). - Page 3 LED indicator Color Function Off: No Power supply. Green Light: Indicates the switch has power. Off: No device is connected to the corresponding port. Light: Indicates the link through that port is successfully Green established at 10/100Mbps. LNK/ACT Blink: Indicates that the Switch is actively sending or receiving data over that port.
-
Page 4: Lcd Features
The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50/60HZ. LCD Features The PoE Switch with the fun on of the LCD display and PoE. The LCD can display the working cond n of PoE port not only, s ll can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light load, Low voltage, Over voltage,High temperature, and so on... -
Page 5: Desktop Installation
3. Installation the Switch This part describes how to install your Ethernet Switch and make connec ons to it. Please follow the following instru ns in avoid of incorrect installa on causing device damage and security threat. Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet cloth or liquid;... - Page 6 3.2.Rack mountableInstallation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first, please install the mounting brackets on the switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.
- Page 7 3.3 Turn on the switch Please plug the power supply into the switch, the internal power system of the switch can Auto-regulate the working power according to the actual input power. When the switch is power on, the power indicator will be light on the front panel of the switch shines.
-
Page 8: Specifications
(There is a power supply socket on the back panel of the PoE Ethernet switch. The power input is: 100V-240Vac, 50/60Hz.) Specifications Model 24FE+2GE+2G SFP IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x, Standard IEEE802.3af, IEEE802.3at, IEEE802.3bt 10BASE-T: UTP category 3,4,5 cable (≤100m) Network - 100BASE-TX: UTP category 5 cable (≤100m) - Page 9 - 9 -...