ProForm PATL41306.0 User Manual page 25

Press the On/Off button and adjust the
2
brightness, contrast, color, sharpness, and/or
hue of the television.
A few seconds after the On/Off button is pressed,
the brightness level indicator will appear on the tele-
vision screen. Press the Volume buttons repeatedly
to adjust the brightness setting if desired.
Next, press the Channel buttons repeatedly until the
contrast, color, sharpness, or hue level indicator ap-
pears. Adjust each setting, if desired, by pressing
the Volume buttons.
Press the On/Off button again and add or
3
delete channels.
To add or delete a channel, first press the
Channel buttons until the desired channel number
appears on the screen. Then, press the Volume
increase button to add the channel, or the Volume
decrease button to delete the channel. Continue
this process until you have added all desired
channels and deleted all unwanted channels.
Press the On/Off button again and select a
4
video broadcast system for a single channel.
To select a video broadcast system for a single
channel, first press the Channel buttons until the
desired channel number appears on the screen.
Then, press the Volume buttons until the desired
video broadcast system for the channel appears
on the screen.
Press the On/Off button again and select a
5
video broadcast system for all channels.
To select a video broadcast system for all chan-
nels, press the Volume buttons until the desired
video broadcast system appears on the screen.
When you are finished using the information
6
mode, remove the key.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
25