Safety Information - Mira Alero Installation And User Manual

9.8 kw thermostatic electric shower
Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION
WARNING - This shower can deliver scalding temperatures if not operated,
installed or maintained in accordance with the instructions, warnings and
cautions contained in this guide and on or inside the appliance.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1. Installation of this shower must be carried out in accordance with these
instructions by qualified, competent personnel.
2. Isolate the electrical and water supplies before commencing installation. The
electricity must be isolated at the consumer unit and the appropriate circuit
fuse removed, if applicable. Mains connections are exposed when the cover
is removed.
3.
DO NOT install the shower in areas with high humidity and temperature
(i.e. steam rooms and saunas).
4.
DO NOT install the shower where it may be exposed to freezing conditions.
Ensure that any pipework that could become frozen is properly insulated.
5.
DO NOT switch the shower on if there is a possibility that the water in the
shower is frozen.
6.
DO NOT switch the shower on if water starts leaking from the shower case.
Isolate the electrical supply to the shower immediately.
7.
DO NOT connect the outlet of the shower to any tap, control valve, trigger
handset or showerhead other than those specified for use with this shower -
scalding water temperatures and product damage will occur. Only Kohler Mira
recommended accessories should be used.
8.
The water supplies to this product must be isolated if the product is not to be
used for a long period of time. If the product or pipework is at risk of freezing
during this period they should also be drained of water.
9.
DO NOT perform any unspecified modifications to the shower or it's accessories.
When servicing only use Genuine Kohler Mira replacement parts.
10. If the shower is dismantled during installation or servicing then upon completion
the product must be inspected to ensure all electrical connections are tight and
that there are no leaks.
11. Read all installation instructions before installing this shower.
12. Upon completion of the installation, make sure that the user is familiar with the
operation of the shower, and leave this guide with the owner.
3

Advertisement

Table of Contents
loading

Table of Contents