Mira Alero Installation And User Manual page 15

10.
Turn control to full cold.
13.
Set control to 'III'.
15.
Adjust temperature as required.
Flow rate will adjust automatically.
17.
Isolate power.
Note! A slight hissing sound may be heard from the appliance during operation.
High mains water pressure and high shower temperatures will affect the tone. This
is quite normal in use.
11.
Set control to 'II'.
14.
5 - 10 Secs
The temperature will rise further.
16.
Press STOP.
18.
0 - 5 Secs
The shower will purge
water from its tank for a
few seconds.
15
12.
0 - 10 Secs
The temperature will rise
slightly.
+
_
19.
Residual water may drain
over a few minutes.
+
_