8.
Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management Bus) to the power
supply unit to read PSU information. Devices communicate with an SMBus host and/or
other SMBus devices using the SMBus interface.
9.
M.2 (NGFF) card connector (NGFF1)
This connector allows you to install M.2 devices.
•
•
The M.2 (NGFF) device is purchased separately
4-14
This connector supports type 2242 / 2260 / 2280 / 22110 devices on both PCI-E and
SATA interface.
If the SATA M.2 (NGFF1) slot is occupied, the SSATA2 slot will be disabled.
Chapter 4: Motherboard Information