Tool Menu - Asus ESC4000 G4 User Manual

Esc4000 g4 series. 2u rackmount server
Hide thumbs Also See for ESC4000 G4:
Table of Contents

Advertisement

5.11

Tool menu

The Tool menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the submenu.
IPMI HWM
Allows you to run the IPMI hardware monitor.
Start EzFlash
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the
ASUS EZ Flash Utility section for details.
5.12
Exit menu
The Exit menu items allow you to save or discard your changes to the BIOS items.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Discard Changes & Exit
Exit System setup without saving any changes.
Save Changes & Reset
Exit System setup after saving the changes.
Restore Defaults
Restore/load default values for all the setup options.
Boot Override
These items displays the available devices. The device items that appears on the screen
depends on the number of devices installed in the system. Click an item to start booting from
the selected device.
Launch EFI Shell from filesystem device
This item allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available filesystem devices.
5-42
Chapter 5: BIOS Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esc4000 g4x

Table of Contents