Toyota Sequoia 2011 Manual page 43

1-2. Opening, closing and locking the doors
Rear step bumper
Back door strap
■
The power back door can be opened when
■
The engine switch is in the ON position, and the shift lever is in P.
●
The engine switch is off or in the ACC position.
●
Jam protection function (vehicles with power back door)
■
If anything obstructs the power back door while it is closing/opening, the
back door will automatically operate in the opposite direction.
If the power back door does not work
■
The back door must be initialized. To initialize, close the back door com-
pletely by hand and unlock the back door.
Back door closer (vehicles with power back door)
■
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.
44
For rear end protection and eas-
ier step-up loading.
To get on the rear step bumper,
use the shaded area in the illus-
tration.
Use the strap when closing.