Toyota Sequoia 2011 Manual page 39

1-2. Opening, closing and locking the doors
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
When locking the doors using the key
■
The door cannot be locked if the key is in the engine switch.
Key reminder buzzer
■
A buzzer sounds if the driver's door is opened, while the engine switch is in
the ACC or LOCK position to remind you to remove the key.
40
Shift the shift lever to P or N,
press and hold the driver's door
lock switch (
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever position
P
N
or ) for
to the
Driver's door lock
switch position