Table of Contents
Advertisement
3-8. Other interior features
Repeat the steps above to program another device for each of
the remaining HomeLink
486
Press and hold down one of the
buttons on the HomeLink
the button on the transmitter.
When
the
®
HomeLink
to a rapid flash, you can release
both buttons.
If the HomeLink
on but does not flash, or flashes
rapidly for 2 seconds and remains
lit, the HomeLink
already programmed. Use the
other
buttons
"Reprogramming a HomeLink
button" instructions. (→P. 488)
Test
the
®
HomeLink
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and
hold
®
HomeLink
door has the rolling code feature
if
the
®
HomeLink
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing "Programming a rolling code
system".
®
buttons.
®
indicator
on
changes from a slow
®
indicator comes
®
button is
or
follow
operation
of
by
pressing
the
programmed
button. The garage
indicator
(on
) flashes rapidly for 2
and
the
the
®
the
the
the
Hide quick links:
Advertisement
Table of Contents
