Transportation and Lifting
Lifting
Please do not remove the packaging until the unit is close to
the installation location.
•
Do not place anything on the device
•
Use two ropes for lifting the outdoor unit
Hoisting method
Hoist the unit slowly and ensure that it is level.
① Removal of the outer packing is strictly prohibited
② Hoist outdoor unit packaging as shown using two ropes.
•
To ensure safety, slowly lift while keeping the unit level.
•
Do not use a forklift to move the unit without the unit
packaging.
•
Padding should be used to protect the unit while lifting it.
Manual handling
•
In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is
no debris inside the machine, or there may be a fire or accident.
Follow these points when moving the unit by hand:
① Do not destroy the wood base.
② In order to prevent the outdoor unit from tipping note the units center of gravity as shown in the figure.
③ Use two or more people to carry and move the outdoor unit.
Handles
Wood base
CAUTION
CAUTION
rope
CAUTION
Center of
gravity
3
Over 60 degrees
2.3~3.3 ft
Do not remove
packing tape and
packing box.
As shown in the
rope through
the wood base
around the lifting
hole.
Unit maximum tilt angle 20
degrees.