Citizen CLP-621 Technical Manual page 53

[Menu settings print sample in Factory/Service mode] [Menu settings print sample in Factory/Service mode]
Machine Information Machine Information
Model Number Model Number
Boot Version Boot Version
ROM Version ROM Version
ROM Date(DD//MM//YY) ROM Date(DD//MM//YY)
ROMCheck Sum ROMCheck Sum
Head Check Head Check
Print Counter Print Counter
Service Counter Service Counter
Sensor Monitor Sensor Monitor
Option Interface Option Interface
Factory Mode Settings Factory Mode Settings
Through Sensor Position Through Sensor Position
Reflect Sensor Position Reflect Sensor Position
Machine Tear Position Machine Tear Position
Machine Cut Position Machine Cut Position
Machine Peel Position Machine Peel Position
Machine Horizontal Pos. Machine Horizontal Pos.
AutoCal Mode AutoCal Mode
See Through Sensor See Through Sensor
Reflect Sensor Reflect Sensor
Double Heat Double Heat
PowerOn Head Check PowerOn Head Check
Head Error Print Head Error Print
Max Page Length Max Page Length
Ribbon Control Ribbon Control
Ribbon End Detection Ribbon End Detection
Current Menu Settings Current Menu Settings
[Page Setup Menu] [Page Setup Menu]
Print Speed Print Speed
Print Darkness Print Darkness
Darkness Adjust Darkness Adjust
Print Method Print Method
Continuous Media Length : 4.00 inch Continuous Media Length : 4.00 inch
Vertical Position Vertical Position
Horizontal Shift Horizontal Shift
Media Sensor Media Sensor
Small Media Adjustment Small Media Adjustment
Small Media Length Small Media Length
* Symbol Set * Symbol Set
[System Setup Menu] [System Setup Menu]
Sensor Level Sensor Level
Buzzer Select Buzzer Select
Metric/Inch Metric/Inch
Max Media Length Max Media Length
Setting Lock Setting Lock
Keyboard Lock Keyboard Lock
Control Code Control Code
Emulation Select Emulation Select
[After Print Menu] [After Print Menu]
AutoConfigure AutoConfigure
Function Select Function Select
Cutter Action Cutter Action
Paper Position Paper Position
Mode/Repeat Key Mode/Repeat Key
[Interface Menu] [Interface Menu]
RS-232C Baud rate RS-232C Baud rate
RS-232C Parity RS-232C Parity
RS-232C Length RS-232C Length
RS-232C Stop bit RS-232C Stop bit
RS-232C X-ON RS-232C X-ON
IEEE1284 IEEE1284
: CLP-6XX : CLP-6XX
: X.XX : X.XX
: XX00XXXX : XX00XXXX
: XX/XX/XX : XX/XX/XX
: XXXX : XXXX
: OK : OK
: : 2.234 km 2.234 km
: : 2.234 km 2.234 km
: 1.50 V : 1.50 V
: None : None
: 0 dot : 0 dot
: 0 dot : 0 dot
: 0 dot : 0 dot
: 0 dot : 0 dot
: 0 dot : 0 dot
: 8 dot : 8 dot
: On : On
: 0.0 V : 0.0 V
: 0.0 V : 0.0 V
: Off : Off
: On : On
: No : No
: 32 inch : 32 inch
: Auto : Auto
: Quick : Quick
: 4 IPS : 4 IPS
: 10 : 10
: 00 : 00
: Thermal Transfer : Thermal Transfer
: 0.00 inch : 0.00 inch
: 0.00 inch : 0.00 inch
: See Through : See Through
: Off : Off
: 1.00 inch : 1.00 inch
: PM : PM
: 1.5 V : 1.5 V
: On : On
: Inch : Inch
: 10.00 inch : 10.00 inch
: Off : Off
Off Off
: STD : STD
: DM4 : DM4
: On : On
: Tear : Tear
: Backfeed : Backfeed
: 0.00 inch : 0.00 inch
: Disabled : Disabled
: 9600 bps : 9600 bps
: None : None
: 8 bit : 8 bit
: 1 bit : 1 bit
: Yes : Yes
: On : On
2-41
2-3. Operation Panel
Submenus for maintenance only
"
* The settings of Symbol
"
Set can be changed only
by a command.
CLP-621 & CLP-631