Contents - Kenwood TK-80 Service Manual

2. How to Enter Each Mode
No. Mode
1 User mode
2 User menu mode
3 Dealer mode
4 Dealer menu mode
5 Service adjustment mode
6 Reset mode
[POWER] [SCAN]
key key
3. Reset Mode
3-1. All Reset
Restores the factory default settings.
Set DIP SW1 to ON, then press [POWER] while holding
[MENU], [MODE], and [DATA].
"HELLO" appears on the display, indicating the system
has been reset.
• All reset does not clear adjustment data settings.
• If the power supply is cut off during all reset, the forced all
reset is executed as soon as power is restored.
3-2. Battery Reset
When the power supply from the backup battery is inter-
rupted, the factory default settings are restored, except for
memory channels 01 to 10.
• Battery reset occurs automatically whenever the power
backup fails to function.
Downloaded from www.Manualslib.com
REALIGNMENT
Operation
Power ON
[User mode] + [MENU]
[MENU] + [MODE] + Power ON
[Dealer mode] + [MENU]
[SCAN] + [DATA] + Power ON
[MENU] + [MODE] + [DATA]
+ Power ON
[MENU] [MODE] [DATA]
key key key
[DIAL]
manuals search engine
Dealer mode enabled
Turn [DIAL] or
press any key.
Memory channel
selector write mode
[MODE]
[MODE] [DATA]
RX frequency write
mode *2
[MODE] [DATA]
TX frequency write
mode *2
[MODE] [DATA]
Type of emission
(MODE) write mode *2
*1
[MODE] [DATA]
[DATA]
Alphanumeric display
data write mode *2
[MODE]
[MODE] [DATA]
*1
Transmit power limit
write mode
[DATA]
*1 : When the specified diode D7 is not present.
*2 : Press [SCAN] to more to the next digit.
4. Dealer Mode
• This mode allows dealers to select functions for users.
• Dealers can customize the receive frequency, transmit
frequency, type of emission (MODE), alphanumeric dis-
play, transmission power limit, and set functions.
Contents to be
Mode to be used
customized
Receive Receive frequency
frequency write mode
Transmit Transmit frequency
frequency write mode
Type of emission Type of emission
(MODE) (MODE) write mode
Alphanumeric Alphanumeric display
display data write mode
Transmit power Transmit power limit
limit write mode
Set function Menu mode
- Memory channel
selector mode
TK-80
DIP switch SW1 is ON.
Press [POWER] while
holding [MENU] and
[MODE].
[MENU]
Dealer
[MENU] menu
mode
[MENU]
[MENU]
Press [DATA]
or [MODE]
to switch
memory
[MENU]
channels.
Turn [DIAL]
to change
the setting.
[MENU]
Purpose
To write to memory
channels
Select function setting
To select memory
channels
3