Optional Accessories - Hitachi DH 24PD2 Technical Data And Service Manual

5-2. Optional Accessories

A. Drilling anchor holes (rotation + hammering)
Drill bit (slender shaft)
(1) Drill bit (slender shaft)
Outer dia. (mm)
Effective length (mm)
3.4 (1/8")
3.5 (9/64")
Drill bit (taper shank)
(1) Drill bit (taper shank)
(1) Drill bit (taper shank)
Outer dia. (mm)
11 (7/16")
12.3 (31/64")
12.7 (1/2")
14.3 (9/16")
14.5 (73/128")
17.5 (11/16")
21.5 (27/32")
Part name Code No.
A-taper 303619
B-taper 303620
(2) Adapter for slender shaft
(SDS-plus shank)
Drill bit (slender shaft)
Overall length (mm)
45 (1-25/32") 90 (3-17/32")
45 (1-25/32") 90 (3-17/32")
(2) Taper shank adapter
(SDS-plus shank)
(2) Taper shank adapter
Type
Code No.
944460
944461
Morse taper
993038
No. 1
944462
944500
944463
944464 Morse taper No. 2
Taper shank adapter (A-taper or B-taper) is provided as an
optional accessory, but drill bit is not provided.
Code No.
306369
306368
(3) Cotter
Code No.
303617
303618
--- 5 ---
Adapter for slender shaft
Code No.
306370
(3) Cotter
Code No.
944477