Optional Accessories (Sold Separately) - Hitachi DH 38SS Handling Instructions Manual

English

OPTIONAL ACCESSORIES (sold separately)

Through-hole drilling (Rotation + Hammering)
○
(1） Drill bit (hexagon shank)
Overall length: 280, 400, 505 mm
External dia.: 16, 19, 22, 25, 28, 32, 38 mm
Anchor hole drilling (Rotation + Hammering)
○
(1) Drill bit (taper shank)
External dia.: 11, 12, 14.3, 14.5,
Taper shank adapter
Morse taper (No. 1)
Morse taper (No. 2)
A-taper
B-taper
Large dia. hole boring (Rotation + Hammering)
○
(1) Center pin
(1) Center pin
● Applied to core bits from 38 mm to 105 mm
● Applied to core bits 32 mm and 35 mm
NOTE
Do not use core bits 25 mm or 29 mm.
(2) Core bit
● External dia. 25, 29, 32, 35, 38, 45, 54, 64, 79, 94, 105 mm
(with guide plate, not applicable to cores 25 mm or 29 mm)
(3) Core bit shank
● Applied to core bits above 38 mm
● Applied to core bits below 35 mm
(3) Cotter
+
+
17.5, 21.5 mm
Application drill bit
Drill bit (taper shank) 11, 12, 14.3, 14.5, 17.5 mm
Drill bit (tape shank) 21.5 mm
Taper shank adapter formed A-taper or B-taper is provided
as optional accessory, but drill bit for it is not provided.
+
(Guide plate)
(2) Taper shank adapter
+
(2) Core bit
20
+
(3) Core bit shank